Track Light AC LED Module AC230V Aluminum PCB Led Module 30w No Shadow

AC COB LED indoor wall light track light AC230V 20W 3000K 4000K 6000K 70Ra 80Ra driver on board Aluminum PCB

TYF-D4545P3023L0.pdf

• Connected directly to AC voltage without driver;
• A module with integrated components;
• Economical one-piece solution;
• High efficiency, high power factor and low harmonic distortion;
• High color rendering index (≥80);
• High luminous efficacy 110 LM/W;
• Three-year warranty;
• LEDs approved LM80
• Application: Flood light

1) product code: C=Client Module D=Self Module

2) Client Code & Module Code: if ①=C then 4 digit for client code else for self module code

3) IC Code: one character for IC

4) Power Code:

5) Voltage Code:11=110V,12=120V,22=220V,23=230V

6) CCT Code

Electrical & Optical Characteristics(Ta=25℃) Table 2-1

Optical properties

Chromaticity Bins

TYF complies with the ANSI C78.377A standard for its chromaticity bin structure. For each ANSI quadrangle for the CCT range of 2700K to 6500K, TYF provides 5 Bins and 3 Bins.

Table 4-1 5 step Bins

Table 4-2 3 step Bins

Typical Electrical & Optical Curves

Figure 4-2-1 Relative Power vs. Voltage, T_a =25℃

Figure 4-2-3 Radiant Pattern, T_a =25℃

Notes:

1) All dimensions are in millimeters.(Tolerance:±0.2mm)

2)Scale: None

Note:

1) TYF Opto. DOB Module is Recommended to keep the junction temperature under maximum junction temperature spec.(Table 2-4).

LED lead temperature and IC top case temperature measured with thermocouple. LED and IC unction temperatures can be calculated using the formulas as follow.

Ts_max=Tj_max-Rθj-s * Pd

For Example:

If LED lead temperature and IC top case temperature are 90℃ then the LED junction temperature

Tj=Ts_max+Rθj-s*Pd=90℃ + 12 ℃/W* 1 W = 102 ℃

and the IC junction temperature

Tj=Ts_max+Rθj-s*Pd=90 ℃ + 15℃/W*2 W= 120 ℃

Silicone Resin of DOB (AC-COB) Handing

TYF Opto. LED modules products, packed in plastic Tray, according to different size, XX PCs each plastic Tray, as shown in the following. products without plastic box packed in bubble bags, in order to prevent the outside pressure, choose different bubble bag, according to the product size in each pack of XX products, packaged product will be stored in the form of carton and sealed, as shown in the following.

1) xx PCS LED module per Tray 4) Box information & packing

2)Tray stack and taping, XX LED module trays and additional 1 dummy trays each up of box. Add silica gel (1 each) on top of the tray

3) Sealing packing